The CoCo-Pi Project



Zipped SD card image for the RPi3 B+, 4 & 400 (unified).  Minimum 16GB SD card (32GB or higher is recommended).

NOTE: Unzip and write the image (*.img) to the SD card, NOT the actual *.zip file.  Please verify the *.img file is correct using the included MD5 checksum file.


Multi-platform SD imaging software (Windows, Linux, Mac):

https://www.balena.io/etcher/


Windows only can use Win32DiskImager to write image to SD card:

https://sourceforge.net/projects/win32diskimager/


Linux console users can use the 'dd' command from a console:

sudo dd if=CoCoPi-16GB-Unified-CommunityEdition-X-20210826.img of=/dev/sdd bs=1M

Please specify complete path to .img file (if it’s not in the same directory you are running the command from).  Replace /dev/sdd with the correct SD card device for your system.


Official CoCo-Pi Project Web Site:
http://coco-pi.com/


CoCo-Pi Group Facebook Page:
https://www.facebook.com/groups/748644118674047/